Technical Data
Technical Specifications
General
Dimensions
Environmental
Weight
(in Kgs)
Power Supply
Consumption
(nominal Watts)
Lump-in-Line PSU
Interfaces
Interface
DTE
ISDN
Analog ports
Power Fail ports
ISDN
Data Rates
Telephone
LAN
WAN
Audio
External
Control
Installation Manual
IP Office
IP401:
IP403/6/12 and Expansion Modules : Width: 445mm. Height: 71mm. Depth: 245mm
0 to +40°C. 95% relative humidity, non-condensing.
Unit:
401 403 406 412 Analog16 DT/DS16 DT/DS30
1.2
2.6
3.0
3.0
2.5mm DC inlet socket. 24Vdc Power input. Rating 24Vd.c., 2A max.
Unit: 401 403 406 412 Analog16 DT/DS16 DT/DS30
24
26
16
17.5
Power Requirements: I/P 100-240Vac, 50/60Hz, 81-115VA, Input current 2A max
O/P 24Vdc, 1.875A, output Power 45W max.
The Lump-in-line PSU is CE/UL/Dentori Safety Approved.
Information
25 way D-Type female connector, V.24/V.28. (9 way D-type on IP412s)
ROW Interfaces:
BRI :
RJ45 sockets. ETSI S/T Interface to CTR3 for Pan European Connection.
PRI E1:
RJ45 socket. ETSI T Interface to CTR4 for Pan European Connection.
PRI E1-R2:
RJ45 socket. ETSI T Interface to CTR4 for Pan European Connection.
PRI E1-R2:
75Ω BNC Coax.. ETSI T Interface.
PRI T1:
RJ45 socket: FCC Part 68/JATE connection.
USA Interfaces:
PRI T1 Service:
Ground Start (GS) – Default, E&M, 56k data for 5ESS, 56/64/64 restricted for 4ESS
PRI ISDN Switch support:
4ESS, 5ESS, DMS-100, DMS-250 (includes conformance to ANSI T1.607 & Bellcore Special Report
SR4287, 1992
PRI ISDN Services:
AT&T Megacom 800, AT&T WATS (4ESS), AT&T SDS Accunet 56kB/s & 64kB/s (4ESS), AT&T
Multiquest (4ESS).
RJ45 sockets: Loop start/Ground start (regional dependant)
RJ45 sockets: telephone ports act as master sockets
BRI: B-channel 64kbps or 56kbps, D-channel 16kbps.
PRI: B-channel 64kbps or 56kbps, D-channel 64kbps.
RJ45 sockets. EU - Telephone ports act as master sockets.
CLI Schemes: DTMFA, DTMFC, DTMFD, FSK and UK20.
REN = 2
Off Hook current = 25mA.
Ring Voltage = 40V (nominal) RMS.
External Bell (via analog port); REN = 1
RJ45 sockets. Auto-negotiating 10/100BaseT Ethernet (10Mbps).
Port 8 is MDI/MDIX switchable via the adjacent Cascade pushbutton switch.
Refer to pages 15, 19 and 23.
37 way D-Type female sockets. X.21 interface to 2048k bps, V.35 interface to 2048k bps and V.24 Interface to
19k2 bps.
3.5mm Stereo Jack socket. Input impedance - 10k /channel.
Maximum a.c. signal – 200mV rms.
3.5mm Stereo Jack socket. Switching Capacity - 0.7A.
Maximum Voltage - 55V d.c. On state resistance - 0.7Ω.
Short circuit current - 1A. Reverse circuit current capacity - 1.4A.
Width: 255mm. Height: 71mm. Depth: 235mm.
WAN3 So8 Phone8 Phone16 Phone30
2.9
3.0
3.50
WAN3 So8 Phone8 Phone16 Phone30
5
24
30
40DHB0002USCL – Issue 7 (09/25/2002)
Technical Specifications - Page 67
2.8 2.75
2.80
2.90
12
24
12
16
Technical Data - Page 67
3.10
30