Mfd Display Units - Garmin G500H Reference Manual

AUX GROUP

MFD Display Units

NOTE: At any time during the setting of your preferences, pressing
the DFLT UNIT soft key will restore the settings for brightness,
synchronization, time format, time offset and display units to the initial
settings.
NOTE: The corresponding GPS navigator must also be set to match
the selection chosen (distance, speed, NAV angle, pressure, and
temperature units) on the GDU 620.
Setting Distance and Speed Units
1) Press the small MFD knob and turn the large MFD knob to move to the MFD
DISPLAY UNITS box.
2) Turn the small MFD knob to display your choices of IMPERIAL, METRIC, and
NAUTICAL units for distance and speed displayed on MFD. Press ENT to
confirm your selection. Press the small MFD knob to exit editing mode.
Setting Altitude and Vertical Speed Units
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD knob and turn the large MFD knob to move to the desired field of the
MFD DISPLAY UNITS box.
2) Turn the small MFD knob to display your choices of FEET or METRIC units
for altitude and vertical speed. Press ENT to confirm your selection. Press the
small MFD knob to exit editing mode.
Setting NAV Angle
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD knob and turn the large MFD knob to move to the desired field of the
SYSTEM DISPLAY UNITS box.
2) Turn the small MFD knob to display your choices of MAGNETIC(°) or TRUE (°)
measurement for navigating. Press ENT to confirm your selection and move
to the next preference or press the small MFD knob to exit editing mode.
Setting Pressure Units
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD knob and turn the large MFD knob to move to the desired field of the
SYSTEM DISPLAY UNITS box.
50 G500H Cockpit Reference Guide 190-01150-03 Rev F