Adjusting The Course Pointer; Hsi Bearing Pointers - Garmin G500H Reference Manual

PRIMARY FLIGHT DISPLAY (PFD)

Adjusting the Course Pointer

Press the CRS key and turn the PFD knob to select a course for a VOR/ILS or
OBS mode course.

HSI Bearing Pointers

NOTE: The Bearing Pointer for navigation source 1 (BRG1) will be an
arrow with a single line. The Bearing Pointer for navigation source 2
(BRG2) will be an arrow with a double line.
To toggle between the available bearing pointers, press the PFD soft key followed
by the BRG1 or BRG2 soft keys.
The BRG1 soft key cycles through modes NAV1 and GPS1. Additionally, ADF
is available if an ADF source is installed.
The BRG2 soft key cycles through modes, NAV2 and GPS2 if a second NAV
or GPS source is available. Additionally, ADF is available if an ADF source is
installed.
NAV2 Bearing Pointer
Selected source for
BRG 1 bearing pointer
14
Bearing Pointers on the HSI
G500H Cockpit Reference Guide
NAV1 Bearing Pointer
Selected source for
BRG 2 bearing pointer
190-01150-03 Rev F