Garmin G500H Reference Manual page 52

Coverage
Area
Manual
Request
Configuring GFDS Data Request Page
1) Turn the large MFD knob to the Coverage box. Press ENT to select or
deselect the coverage areas. Selected coverage areas are denoted by a green
check mark.
2) Turn the large MFD knob to the Auto Request box and press ENT to change
the update rate to either OFF or ON.
3) Turn the large MFD knob to the Manual Request box and press ENT to either
send request or cancel current request.
4) Press the small MFD knob to return to the GFDS page.
42
GFDS Data Request Page
G500H Cockpit Reference Guide
Coverage Area
Distances:
Remaining FPL,
Next 50 NM -
Next 500 NM
Width of Coverage:
50 NM - 500 NM
Update Rate:
Off - 60 Minutes
Cancel Manual
Request
Status of Request
190-01150-03 Rev F