Garmin G500H Reference Manual page 58

AUX GROUP
Selecting Temperature Reference
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Temp Reference value.
2) Turn the small MFD knob to select the Temp Reference type and press ENT
Synchronization (For Dual Installations Only)
NOTE: The SYNCHRONIZATION option will only be available if a
second GDU 620 is installed.
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD knob and turn the large MFD knob to move to the desired field in the
SYNCHRONIZATION box.
2) Turn the small MFD knob to turn ON or OFF synchronization of the CDI. Turn
the large MFD knob to move to the BARO setting. Turn the small MFD knob
to turn the synchronization of the barometer ON or OFF. Turn the small MFD
knob to turn the synchronization of databases ON or OFF.
3) Press ENT to move to the DATE/TIME box or press the small MFD knob to
exit the editing mode.
48
Figure 3-44 Outside Air Temperature Selection
Synchronization Option
G500H Cockpit Reference Guide
.
190-01150-03 Rev F