Samsung AC071MN4PKH Installation Manual page 31

CAUTION
The main address must be set to a value in the range
0 to 14. If you set other values, communication error
will occur.
If any of SEG5 and SEG6 is set to a value in the range
A to F, the main address of the indoor unit does not
change.
If SEG3 is set to 0, the indoor unit maintains the
existing main address even if SEG6 is set to a new
value.
If SEG9 is set 0, the indoor unit maintains the existing
RMC address even if SEG11 and SET12 are set to new
values.
Setting the installation options in a batch
Option No. for an indoor unit address:
02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Function Page
Indication Details Indication
Indication
and details
0
1 Make sure that the power is supplied to the indoor
2 Set the installation options of indoor units, by
SEG2 SEG3
Mode
Details
Reserved
2
unit. If the indoor unit is not plugged in, it must
include a power supply.
Indoor unit
referring to the following table and by following the
steps in Common steps for setting the addresses and
options on page 19.
The installation options of indoor units are set to
020000-100000-200000-300000 by default.
The SEG20 option, Individual control with remote
control, allows you to control multiple indoor units
individually by using the remote control.
SEG4 SEG5
Use of external
Use of central
temperature
control
sensor
Indication Details Indication
0 Disuse 0
1 Use 1
SEG6
Compensation of
the fan RPM
Details Indication Details
Disuse
0 (recessed
installation)
High-
Disuse
ceiling
1
mode
(recessed
installation)
Disuse
4
(exposed
installation)
High-
Use
ceiling
5
mode
(exposed
installation)
31
English