Samsung AC071MN4PKH Installation Manual page 30

Installation Procedure
Setting the indoor unit addresses
Option No. for an indoor unit address:
0AXXXX-1XXXXX-2XXXXX-3XXXXX
Before installing an indoor unit, be sure to set an address
for the indoor unit by taking the following steps:
1 Make sure that the power is supplied to the indoor
unit. If the indoor unit is not plugged in, it must
include a power supply.
Option SEG1
Function Page
Indication Details
Indication
and details
0
Option SEG7
Function Page
Indication Details
Indication
and details
1
30
English
Indoor unit
SEG2
Setting main
Mode
Indication Details Indication
0
A
1
SEG8
Setting RMC
Indication
0
Reserved
1
2 Set an address for each indoor unit using the remote
control, according to your air conditioning system
plan, by referring to the following table and by
following the steps in Common steps for setting the
addresses and options on page 19.
The indoor unit addresses (main and RMC
addresses) are set to 0A0000-100000-200000-
300000 by default.
If indoor units and outdoor units match 1:1, you
don't need to set the main address because it is
automatically set by the outdoor unit.
If you are using on or off controller, set RMC
address.
SEG3 SEG4
address
Details
No main
Reserved
address
Main
address
setting
mode
SEG9 SEG10
address
Details
No RMC
Reserved
address
RMC
address
setting
mode
SEG5 SEG6
Indoor unit number Indoor unit number
Indication Details Indication
Tens
0 to 1 0 to 9
digit
SEG11 SEG12
Group channel
Group address
(x16)
Indication Details Indication
RMC1 0 to 2 RMC2
Details
Units
digit
Details
0 to F