Samsung AC071MN4PKH Installation Manual page 27

b Set the SEG10 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
8 Press the (Mode) button. Heat and On appear on the remote control display.
9 Set the SEG11 and SEG12 values:
a Set the SEG11 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG12 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
10 Press the (Mode) button. Auto and Off appear on the remote control display.
11 Set the SEG14 and SEG15 values:
a Set the SEG14 value by pressing the
value you want to set appears on the remote control display.
b Set the SEG15 value by pressing the
value you want to set appears on the remote control display.
When you press the
following order:
Steps
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
(Low Fan) button repeatedly until the
(High Fan) button repeatedly until the
(Low Fan) or (High Fan) button, values appear in the
Remote control display
SEG10
SEG11
SEG12
SEG14
SEG15
27
English