Samsung AC071MN4PKH Installation Manual page 20

Installation Procedure
2 Set the option values.
CAUTION
The total number of available options are 24: SEG1 to
SEG24.
Because SEG1, SEG7, SEG13, and SEG19 are the page
options used by the previous remote control models,
the modes to set values for these options are skipped
automatically.
Set a 2-digit value for each option pair in the
following order: SEG2 and SEG3
SEG6 and SEG8
SEG12 SEG14 and SEG15
SEG18 and SEG20
SEG24
Take the steps presented in the following table:
1 Set the SEG2 and SEG3 values:
a Set the SEG2 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
b Set the SEG3 value by rotating the Wheel clockwise
until the value you want to set appears on the remote
control display.
When you rotate the Wheel, values appear in the following order:
2 Press the (Mode) button. Cool and On appear on the remote control display.
3 Set the SEG4 and SEG5 values:
a Set the SEG4 value by rotating the Wheel
counterclockwise until the value you want to set
appears on the remote control display.
20
English
SEG4 and SEG5
SEG9 and SEG10 SEG11 and
SEG16 and SEG17
SEG21 and SEG22 SEG23 and
Steps
SEG1 SEG2 SEG3
0 X X
SEG7 SEG8 SEG9
1 X X
SEG13 SEG14 SEG15
2 X X
SEG19 SEG20 SEG21
3 X X
On (SEG1 to SEG12)
SEG4 SEG5 SEG6
X X X
SEG10 SEG11 SEG12
X X X
SEG16 SEG17 SEG18
X X X
SEG22 SEG23 SEG24
X X X
Off (SEG13 to SEG24)
Remote control display
SEG2
SEG3
SEG4