Table of Contents
Advertisement
Callout
Item
1
PCIe Slot 1
2
PCIe Slot 2
3
PCIe Slot 3
4
PCIe Slot 4
5
PCIe Slot 5
6
PCIe Slot 6
7
Boot Drives
8
Power supplies
9
Video port
10
1 Gb RJ-45 ports # 1, 2, 3, 4
11
iLO connector
12
USB 3.0 connectors
Description
For all server models, the Accelerator card is installed in
this slot. Both indicator LEDs on the card emit solid green
continuously to indicate normal operation.
For all server models, this slot is used by the Accelerator card.
SAS Expander Card.
LSI RAID controller battery.
For dual processor servers only, this slot is available for
installing additional boards.
LSI MegaRAID SAS 9361-8i RAID Controller.
Two 480 GB SATA SSDs.
Two, redundant, 800 W hot plug power supplies with fans,
numbered PS1 and PS2 from right to left. Each power supply
has a status indicator LED for AC power present (green).
If you need to replace a power supply, always disconnect the
power cord before removing the power supply.
Use to connect a VGA monitor for local access.
1 Gb LOM containing four ports numbered 1 through 4, from
left to right. Use interfaces 1 and 2 for the Hewlett Packard
Enterprise Management network.
Dedicated port for remote, out-of-band, web-based
management using Integrated Lights-Out (iLO), an HPE
proprietary embedded server management technology.
Dual USB 3.0 connectors enable you to connect a USB device,
such as a mouse or keyboard.
Chapter 1: Component identification
8
Hide quick links:
Advertisement
Table of Contents
