Drive Monitoring - HP SimpliVity 380 Gen9 Installation And Maintenance Manual

Callout Function
2 Health LED
3 NIC status LED
4 UID button

Drive monitoring

The LEDs on the front of each drive indicate when a drive has failed or is failing. If a drive fails, contact Customer
Support (http://www.hpe.com/support/hpesc) to obtain a replacement drive of the same type, size, and speed.
The drives in the front panel store user and federation data and are protected by RAID. A Medium, All Flash or a
Large, All Flash model can tolerate up to two solid state drive (SSD) failures simultaneously without data loss. A
Small, All Flash model can tolerate one SSD failure without data loss.
LED State
Solid green Normal operation
Flashing green ILO is rebooting
Flashing amber System degraded
Flashing red System critical
Solid green Linked to network
Flashing green Network active
Off No network activity
Solid blue Activated
Flashing blue One flash per second: Remote management or firmware
upgrade in progress
Four flashes per second: ILO manual reboot initiated
Eight flashes per second: ILO manual reboot in progress
Off Deactivated
Chapter 4: Server troubleshooting 21