Pairing Your Headset; How To Pair Your Headset For The First Time - Plantronics Voyager PRO User Manual

Pairing Your Headset

Pairing is the process of introducing your
headset to your phone. Before using your
headset for the first time, you must pair it
with your Bluetooth
new headset includes Plantronics QuickPair
Technology to simplify the Bluetooth setup
process. The first time you turn your earpiece
on, your earpiece automatically enters pairing
mode for 10 minutes. Once paired successfully,
your earpiece stays on for instant use.
If not successfully paired after 10 minutes, your
earpiece automatically powers off. When you
turn the earpiece on again, it automatically
goes into pairing mode until successfully paired
with a Bluetooth phone.
To see a demo of the pairing process, visit
www.plantronics.com/EasyToPair
4
enabled phone. Your
®
How to Pair Your Phone with Your
Headset for the First Time
1
Turn on your phone's Bluetooth feature.
For most phones, select Settings/Tools >
Connections > Bluetooth > On. See your
phone's user guide for more information.
2
Turn the headset on.
Press and hold the power button until the
indicator flashes red/blue. The headset is
now in pairing mode.
If you don't see the red/blue flash, press and
hold the power button to turn your headset
off, and then press and hold the power
button again until you see the red/blue flash.
This headset is equipped with Secure
NOTE
Simple Pairing (SSP). If your phone supports