Charging Your Headset; How To Charge Your Headset Using The Ac Charger; Pairing Your Headset; Plantronics Quickpair™ Technology - Plantronics Explorer 230 User Manual

Charging Your Headset

1
How to Charge Your Headset Using Only the AC Charger
Before using your headset for the first time, charge it for at least
20 minutes. A full charge takes approximately two hours.
1
Connect the AC charger to a power outlet.
2
Plug the AC jack into the charging jack on the headset.
While your headset is charging, the indicator glows red. When your
headset is fully charged, the indicator turns off.
WARNiNG Do not use your headset while it is connected to
the charger.
Charging time
2 hours ...................
Full charge
20 minutes ..............
minimum charge
before first use
2
2

Pairing Your Headset

Pairing is the process of introducing your headset to your phone.
Before using your headset for the first time, you must pair it with
your Bluetooth phone. Normally, you need to pair your headset with
your phone only once.
To see a demo of the pairing process, visit www.plantronics.com/
EasyToPair
Plantronics QuickPair ™ Technology
Your new headset includes Plantronics QuickPair technology to simplify
the Bluetooth setup process. The first time you turn your headset on,
your headset automatically enters pairing mode for 10 minutes. Once
paired successfully, your headset stays on for instant use.
If not sucessfully paired after 10 minutes, your headset automatically
powers off. When you turn the headset on again, it automatically goes
into pairing mode until successfully paired with a Bluetooth phone.
3