Charging Your Headset; Headset Controls And Indicators; Pairing Your Headset - Plantronics Voyager PRO Getting Started

Before installing or using this product, please refer to the separate
For Your Safety booklet for important safety, charging, battery, and
regulatory information. This product is equipped with an embedded,
non-replaceable battery. For a full user guide, please visit
www.plantronics.com/documentation

1 Charging your headset

Follow the instructions in the diagram (1) on page ii to
connect your headset to a power outlet.
Minimum charge before first use = 30 minutes
Full charge = 1.5 hours
Do not use your headset while it is connected to the charger.
NOTE Charge only between 0ºC and 40ºC (32ºF and 104ºF).
low battery warnings (dUring a Call)
Battery Level Tone
30 minutes of double high tone
talk time remaining every 15 minutes
10 minutes of talk triple high tone
time remaining every 30 seconds

2 Pairing your headset

1. Turn on your phone's Bluetooth
2. With headset switched off, press and hold the power
button until the indicator LED flashes blue and red.
3. Use the phone menu to search for Bluetooth devices
and select PROPlantronics.
4. If prompted, enter 0000 for the passkey (PIN).
4
Voice Prompt
"battery low" repeats
every 30 minutes
"recharge battery"
repeats every 3 minutes
feature.
®
NOTE The Plantronics PRO supports multipoint technology,
which allows you to use one headset with two different Bluetooth
mobile phones. To pair the headset with an additional phone, turn
on the phone then repeat steps 2 through 4. Please see full online
user guide for more details.

Headset Controls and Indicators

Action Indicator LED
Powering Press power On: blue glow for
on/off on/off button 2 2 seconds
seconds. Off: red glow for
2 seconds
Answer/end Tap call control None
a call button.
Adjust the Tap volume Single blue flash
volume + or -
(during a button.
call)
Mute Press and hold None
(during a volume +
call) and - buttons
simultaneously
until you hear
status prompt.
Prompts only
occur during an
active call.
Redial Double-tap call None
control button.
dUration: TAP is under 1 second. PRESS is 1-4 seconds as directed.
WARNING Do not use headsets at high volumes for an extended
period of time. Doing so can cause hearing loss. Always listen at
moderate levels. See www.plantronics.com/healthandsafety for
more information on headsets and hearing.
Tone
On: ascending tones
Off: descending tones
Single low tone followed by low-
low-high tones
Tone at each change in volume.
Double tone when min/max
volume level reached.
Mute on: high-low tones + voice
prompt "Mute On" (in English).
After 15 minutes high-low tones
advise status. Tones + prompt
repeat every 30 minutes until
Mute is de-activated.
Mute off: high-low tones + voice
prompt "Mute Off" (in English).
Double low tone
5