Table of Contents
Advertisement
USB Bluetooth Adapter Indicator Lights
Action
Disconnected from the headset
Connected to the headset
Microphone turned on
Pairing mode
NOTE
The Bluetooth USB adapter comes pre-paired to the headset;
however, if you fi nd that you need to pair your headset to the adapter again,
you can do so by performing the following steps.
1. Start with the headset powered off.
2. Press and hold the power button for about 5-6 seconds until the light on
the headset starts fl ashing an alternating red-blue. Release the power
button.
3. Insert the Bluetooth USB adapter into the computer. Once the devices
pair successfully, the LED on the headset stops fl ashing.
Indicator Lights
No LED
Solid blue
Flashes blue slowly
Flashes blue rapidly
Pairing Your Headset with the
USB Bluetooth Adapter
8
Advertisement
Table of Contents
