Garmin G1000 Manual page 35

Navigation Map Display Conditions
The Map Setup Page Menu has 'OBSTACLE DATA' and
'TERRAIN DATA' feature On/Off options. The Terrain Ob-
stacle features are summarized in the table below:
Terrain Obstacle
Feature Feature
OFF OFF
OFF ON
ON OFF
ON ON
NOTE: Obstacles are only displayed at certain
map zoom ranges, on certain map fields, and
will only be displayed if an obstacle database is
loaded in the system.
NOTE: The table above is only for the Navigation
Map Page. The Terrain Proximity Page always
shows ONLY caution and warning obstacles.
NOTE: Terrain data can also be displayed by
using the 'On/Off' Navigation Map Page option.
See the Navigation Map Page setup section for
details.
190-00498-00 Draft
190-00498-00_0A.indd 33
Navigation Map Page
NO OBSTACLES DISPLAYED
CAUTION AND WARNING OBSTACLES
DISPLAYED
CAUTION AND WARNING OBSTACLES
DISPLAYED
SAFE, CAUTION, AND WARNING
OBSTACLES DISPLAYED
Garmin G1000 Hazard Avoidance Pilot's Guide for the Cessna Citation Mustang
Displaying Terrain Data on the Navigation Map
Page
Terrain data can be displayed on the Navigation Map
Page by pressing the TERRAIN softkey. Terrain symbol-
ogy (mountain icon) appears next to the map range in the
bottom right corner of the page indicating the presence of
terrain data on the map.
To display terrain data on the Navigation
Map Page:
Press the MAP softkey.
1.
2. Press the TERRAIN softkey. Press the TERRAIN
softkey again to remove terrain data from the
Navigation Map Page.
Figure 7.2.2 TERRAIN Softkey
TAWS/TERRAIN
TERRAIN softkey
3/1/2005 10:33:50 AM
7-33