Priority Marking Configuration Example; Network Requirements; Configuration Procedure - HP 5830 Series Configuration Manual

Step
15. Apply the QoS policy.
16. Display the priority marking
configuration.

Priority marking configuration example

Network requirements

As shown in
Traffic source
Host A, B
Host A, B
Host A, B
Figure 18 Network diagram

Configuration procedure

# Create advanced ACL 3000 and configure a rule to match packets with destination IP address
192.168.0.1.
<Device> system-view
[Device] acl number 3000
[Device-acl-adv-3000] rule permit ip destination 192.168.0.1 0
[Device-acl-adv-3000] quit
Figure 18, configure priority marking on Device to meet the following requirements:
Destination
Data server
Mail server
File server
Command
•
Applying the QoS policy to an
interface
•
Applying the QoS policy to a
VLAN
•
Applying the QoS policy
globally
display traffic behavior
user-defined [ behavior-name ] [ |
{ begin | exclude | include }
regular-expression ]
54
Remarks
Choose one of the application
destinations as needed.
Optional.
Available in any view.
Processing priority
High
Medium
Low