HP 5830 Series Configuration Manual page 52

For example:
• Configure SP+WFQ queuing on GigabitEthernet 1/0/1, and use byte-count WFQ scheduling
weights.
Assign queue 0, queue 1, queue 2, and queue 3 on GigabitEthernet 1/0/1 to the SP queue
•
scheduling group.
Configure queue 4, queue 5, queue 6, and queue 7 on GigabitEthernet 1/0/1 to use WFQ
•
queuing, with the weights 2, 4, 6, and 8 and the minimum guaranteed bandwidth 128 kbps.
The following is the configuration procedure:
# Enter system view.
<Sysname> system-view
# Enable the SP+WFQ queue scheduling algorithm on GigabitEthernet 1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wfq byte-count
[Sysname-GigabitEthernet1/0/1] qos wfq 0 group sp
[Sysname-GigabitEthernet1/0/1] qos wfq 1 group sp
[Sysname-GigabitEthernet1/0/1] qos wfq 2 group sp
[Sysname-GigabitEthernet1/0/1] qos wfq 3 group sp
[Sysname-GigabitEthernet1/0/1] qos wfq 4 group 1 byte-count 2
[Sysname-GigabitEthernet1/0/1] qos bandwidth queue 4 min 128
[Sysname-GigabitEthernet1/0/1] qos wfq 5 group 1 byte-count 4
[Sysname-GigabitEthernet1/0/1] qos bandwidth queue 5 min 128
[Sysname-GigabitEthernet1/0/1] qos wfq 6 group 1 byte-count 6
[Sysname-GigabitEthernet1/0/1] qos bandwidth queue 6 min 128
[Sysname-GigabitEthernet1/0/1] qos wfq 7 group 1 byte-count 8
[Sysname-GigabitEthernet1/0/1] qos bandwidth queue 7 min 128
47