Section 2: Accessories & Set-Up - Land Pride PATRIOT FDR1648 Operator's Manual

Section 2: Accessories & Set-up
Section 2: Accessories & Set-up
Front Roller Assembly
(FDR1648, FDR1660, and FDR1672)
Refer to Figure 2-1:
1. Assemble brackets (#2) and (#3) to deck with
carriage bolts (#4) and flange nuts (#5).
2. Insert roller (#8) between brackets and install pin
(#1) through brackets and roller. Secure with
washer (#6) and cotter pin (#7).
.
Front Roller Assembly
Figure 2-1
16
Table of Contents
Cutting Blades
There are four blade choices to select from based upon
soil condition, density of grass, and tractor horsepower.
The appearance of the finish cut may vary between low
lift and high lift blades. See your Land Pride dealer for
blade availability.
Low Lift Blades
Land Pride's low lift blades are designed for mowing over
sandy soil terrain where high suction lift is not crucial.
Sand sucked into the blades accelerates blade wear
more than normal. Low lift blades are recommended
because they produce a lower suction keeping sand uplift
and blade wear to a minimum.
Medium Lift Blades (Factory Standard)
Land Pride's medium lift blades are great when
horsepower is a concern. They produce a medium
suction to lift grass and require less horsepower than
high lift blades.
High Lift Blades
Land Pride's high lift blades develop the greatest suction
for lifting grass for that fresh clean cut look. However,
they may require more horsepower especially when
cutting tall dense grass. They are not recommended for
sandy soil conditions.
Mulching Blades
Land Pride's mulching blades are designed to chop
20563
leaves and/or grass into smaller parts leaving your lawn
looking fresher and cleaner than ever before.
Accessory Part Numbers
Land Pride Part Numbers & Descriptions
Part No.
Front Roller Assembly
315-516S
Low Lift Blade
890-323C
890-204C
890-200C
Medium Lift Blade
890-325C
890-375C
890-318C
High Lift Blade
890-219C
890-171C
890-172C
Mulching Blade
890-700C
890-702C
890-698C
See your Land Pride dealer for blade availability.
Part Description
FDR1648, FDR1660 & FDR1672
(3 blades required per mower)
FDR1648
FDR1660
FDR1672
(3 blades required per mower)
FDR1648
FDR1660
FDR1672
(3 blades required per mower)
FDR1648
FDR1660
FDR1672
(3 blades required per mower)
FDR1648
FDR1660
FDR1672
10/26/17