Samson 5824 Mounting And Operating Instructions page 8

Safety instructions and measures
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warning and caution notes. Furthermore, the operat-
ing personnel must be familiar with the applicable health, safety and accident prevention
regulations and comply with them.
Referenced standards and regulations
The Type 5824/5825 Electric Actuators comply with the requirements of the Directives
2014/30/EU and 2014/35/EU. The declaration of conformity includes information about
the applied conformity assessment procedure. This declaration of conformity is included in
the Appendix of these instructions.
The Type 5824/5825 Electric Actuators are designed for use in low voltage installations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions of the valve on which the electric actuator is mount-
ed, e.g. for SAMSON valves:
u EB 5861 for Type 3260 Three-way Valve
u EB 5863 for Type 3226 Three-way Valve
u EB 5866 for Type 3222 Globe Valve
u EB 5868 for Type 3213 and Type 3214 Globe Valves
u EB 8111 for Type 3321 Globe Valve
u EB 8113 for Type 3323 Three-way Valve
u EB 8131 for Type 3531 Globe Valve for Heat Transfer Oil
u EB 8135 for Type 3535 Three-way Valve for Heat Transfer Oil
8 EB 5824-2 EN