Samson 5824 Mounting And Operating Instructions page 69

A change in the blinking pattern of the yellow LED indicates that data are being saved to
the memory pen.
On
Off
2. Data logging is completed when you remove the memory pen from the serial interface of
the actuator.
Note
You can load a data logging file into the Trend-Viewer by selecting Load diagram ... from the
context-sensitive menu.
Transferring data onto a computer
1. Plug the memory pen (3) together with modular adapter (2) into the serial interface
(COM port) of the computer (1) (Fig. 17 on page 66).
2. Select Read Logged Data from the Memory Pen menu.
3. Choose target directory. If the target directory is not changed, data will be saved in the
directory > SAMSON > Type 5824.
4. Enter the file name.
5. Click Save to start data transmission.
EB 5824-2 EN
2 4
6
8
Transfer data
10
Time [s]
69