Samson 5824 Mounting And Operating Instructions page 43

Parameters
Double-click the required parameter value to open a window to change the parameter.
Fig. 15: Example for input signal range
Right-click it to open a context-sensitive menu that includes the following options:
Edit
Read
Write
Default: ...
Min ...
Max ...
EB 5824-2 EN
Configuration and operation using TROVIS-VIEW
Opens Change parameters window.
Uploads the parameter value from the device.
Only displayed in offline mode (see section 10.1.1).
Downloads the parameter value to the device.
Only displayed in offline mode (see section 10.1.1).
Resets parameter to default setting (setting in gray to indicate that
the parameter value is the same as the default setting)
Resets parameter to minimum value as shown (setting in gray to
indicate that the parameter value is the same as the minimum
value).
Resets parameter to maximum value as shown (setting in gray to
indicate that the parameter value is the same as the maximum
value).
43