Table of Contents
Advertisement
AD1
AD1 Bodypack Transmitter
exit enter
Locking the Controls
Lock transmitter controls to prevent accidental or unauthorized changes to
parameters. The lock icon is shown on the home screen when the control
lock in enabled.
Home Screen Display
The home screen shows transmitter information and status.
Tip: There are four options to choose the information shown on the home
screen. Use the arrow buttons to select one of the following choices:
•
Name
•
Frequency Setting
•
Group (G) and Channel (C)
•
Device ID
The following icons appear to indicate transmitter settings:
•
Battery runtime in hours and minutes or bar display
•
Key: Displayed when encryption is enabled
Battery Installation
① Accessing the Battery Compartment
Press the side tabs on the bodypack and open the battery door as shown to access the battery compartment.
2017/08/03
^
^
AA
Acts as a 'back' button to return to previous menus or parameters
exit
without confirming a value change
enter
Enters menu screens and confirms parameter changes
Use to scroll through menu screens and to change parameter
∨∧
Tip: Use the following control shortcuts for quick set up:
•
Hold the ∧ button while powering-on to lock or unlock the transmitter
controls
•
Hold the exit button while powering-on to set the transmitter RF output
to mute
1. From the Utilities menu, navigate to Lock and select one of the following:
⁃
Locked: Locks the controls
⁃
Unlocked: Unlocks the controls
2. Press enter to save.
Tip: To quickly unlock a transmitter: Press enter, select Unlocked, and press
enter.
•
Lock: Displayed when controls are locked
•
STD: Standard Transmission Mode
•
HD: High Density Transmission Mode
•
Box: When the box has an "x", Mute Mode is on and engaged. If the box
is empty, Mute Mode is on, but not engaged.
Shure
470.200
7:45
Shure Incorporated
values
MHz
SB900A
3/12
Hide quick links:
Advertisement
Table of Contents
