AD2
AD2 Handheld Transmitter
Home Screen Display
The home screen shows transmitter information and status.
Tip: There are four options to choose the information shown on the home
screen. Use the arrow buttons to select one of the following choices:
•
Name
•
Frequency Setting
•
Group (G) and Channel (C)
•
Device ID
The following icons appear to indicate transmitter settings:
•
Battery runtime in hours and minutes or bar display
•
Key: Displayed when encryption is enabled
Locking the Controls
Lock transmitter controls to prevent accidental or unauthorized changes to
parameters. The lock icon is shown on the home screen when the control
lock in enabled.
Battery Installation
1
① Accessing the Battery Compartment
Unscrew the cover on the transmitter as shown to access the battery compartment.
② Installing Batteries
•
AA Batteries: Place batteries (note polarity markings) and AA Adapter as shown. Close the door to secure the batteries.
•
Shure SB900A Battery: Place battery as shown (note polarity markings). Remove the AA adapter and stow it in the door. Close the door to secure the
battery.
Note: If using AA batteries, set the battery type using the transmitter menu.
Setting the AA Battery Type
To ensure accurate display of transmitter runtime, set the battery type in the transmitter menu to match the installed AA battery type.
Note: If a Shure SB900A rechargeable battery is installed, selecting a battery type is not necessary and the battery type will display Shure.
2017/08/03
•
Lock: Displayed when controls are locked
•
STD: Standard Transmission Mode
•
HD: High Density Transmission Mode
•
Box: When the box has an "x", Mute Mode is on and engaged. If the box
is empty, Mute Mode is on, but not engaged.
Shure
470.200
7:45
1. From the Utilities menu, navigate to Lock and select one of the following:
⁃
Locked: Locks the controls
⁃
Unlocked: Unlocks the controls
2. Press enter to save.
Tip: To quickly unlock a transmitter: Press enter, select Unlocked, and press
enter.
2
Shure Incorporated
MHz
3/10