AD1
AD1 Bodypack Transmitter
•
Ideally, batteries should be charged to approximately 40% of capacity
for long-term storage
•
Periodically clean the battery contacts with alcohol to maintain ideal
contact
•
During storage, check batteries every 6 months and recharge to 40% of
capacity as needed
For additional rechargeable battery information, visit www.shure.com.
AA Batteries and Transmitter Runtime
Transmitters are compatible with the following AA battery types:
•
Alkaline
•
Nickel Metal Hydride (NiMH)
•
Lithium Primary
A 5-segment battery indicator representing the charge level of the transmitter
battery is displayed on the screens of the transmitter and receiver. The fol-
lowing tables contain the approximate remaining transmitter runtime in
hours:minutes.
Note: Battery runtimes vary by manufacturer, battery age, and environmental
conditions.
AA Batteries and Transmitter Runtime
Alkaline
Battery Indicator
Menu Parameters
The Main menu organizes the available transmitter parameters into three
sub-menus:
•
Radio
•
Audio
•
Utilities
Tip: Use the arrow buttons to scroll between the sub-menus.
Radio
Tips for Editing Menu Parameters
•
To access the menu options from the home screen, press the enter but-
ton. Use the arrow buttons to access additional menus and parameters.
2017/08/03
Approximate
Runtime
Remaining
(hours:minutes)
8:00 - 6:00
> 4:00
> 1:45
≦ 1:45
≦ 0:45
≦ 0:15
Main
NiMH (2700 mAh)
Battery Indicator
Lithium Primary (3500 mAh)
Battery Indicator
•
A menu parameter will blink when editing is enabled
•
To increase, decrease or change a parameter, use the arrow buttons
•
To save a menu change, press enter
•
To exit a menu without saving a change, press exit
Shure Incorporated
Approximate Runtime
Remaining (hours:minutes)
11:00 - 8:00
> 5:00
> 2:00
≦ 2:00
≦ 0:45
≦ 0:15
Approximate Runtime
Remaining (hours:minutes)
14:00 - 10:00
> 6:00
> 2:00
≦ 2:00
≦ 0:45
≦ 0:15
5/12