Stoplight Switch Adjustment; Bulb Replacement - Honda CB125 Shine SP Owner's Manual

STOPLIGHT SWITCH ADJUSTMENT

Refer to the Safety Precautions on page 39.
Check the operation of the stoplight switch
(1) at the right side behind the engine from
time to time.
Adjustment is done by turning the adjusting
nut (2). Turn the nut in the direction (A) if
the switch operates too late and in direction
(B) if the switch operates too soon.
(2)
(A)
(B)
(1)
(1) Stoplight switch ¼LVkW i ykbV fLop½
(2) Adjusting nut
¼,MtfLVa x uV½
68
CB125 Shine SP

BULB REPLACEMENT

Refer to the Safety Precautions on page 39.
The light bulb becomes very hot while the
light is ON, and remains hot for a while
after it is turned OFF. Be sure to let it cool
down before servicing.
Do not put finger prints on the headlight
bulb, as they may create hot spots on the
bulb and cause it to break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol
to prevent its early failure.
• Be sure to turn the ignition switch OFF
when replacing the bulb.
• Do not use bulbs other than those
specified.
• After installing a new bulb, check that
the light operates properly.
Honda Motorcycle & Scooter India Pvt. Ltd.