Side Stand; Wheel Removal - Honda CB125 Shine SP Owner's Manual

SIDE STAND

Refer to the Safety Precautions on page 39.
Check the side stand spring (1) for damage
and loss of tension, and the side stand
assembly for freedom of movement.
If the side stand is squeaky or stiff, clean
the pivot area and lubricate the pivot bolt
with clean engine oil.
(1)
(1) Side stand spring
58
CB125 Shine SP
¼lkbM LVS U M fLiz a x ½

WHEEL REMOVAL

Refer to the Safety Precautions on page 39.
Front Wheel Removal (for Disc & CBS)
1. Place the vehicle on its center stand.
2. Raise the front wheel off the ground
by placing a support block under the
engine.
3. Remove the front axle nut (1).
4. Remove the front axle shaft (2) and the
wheel.
(1)
(1) Front axle nut ¼Ýa V ,Dly uV½
(2) Front axle shaft
¼Ýa V ,Dly "kkW ¶ V½
Do not depress the brake lever when the
wheel is off the vehicle. The caliper piston will
Honda Motorcycle & Scooter India Pvt. Ltd.
(2)