Stoplight Switch Adjustment - Honda CB Hornet 160R Owner's Manual

MAIN FUSE:
The "Main Fuse" (1) is located behind the
left side cover.
The specified fuse is : 20A
1. Remove the left side cover (page 30).
2. Disconnect the "Wire Connector" (2) of
the "Starter Magnetic Switch" (3).
3. Pull out the fuse. If fuse is blown, install
a new fuse. "Spare Main Fuse" (4) is
attached below the starter magnetic
switch.
4. Install the left side cover and the seat.
(1)
(3)
(1) Main Fuse
(2) Wire Connector
(3) Starter Magnetic Switch
(4) Spare Main Fuse
64
CB Hornet 160R
STOPLIGHT SWITCH
ADJUSTMENT
Refer to the Safety Precautions on page 40.
Check the operation of the "Stoplight
Switch" (1) at the right side behind the
engine from time to time.
Adjustment
"Adjusting Nut" (2). Turn the nut in the
"Direction" (A) if the switch operates too
late and in "Direction" (B) if the switch
operates too soon.
(2)
(1)
(4)
(1) Stoplight switch
(2) Adjusting nut
is done by turning
(A) (B)
Honda Motorcycle & Scooter India Pvt. Ltd.
the
(2)