Entering Custom Standard Platinum Resistance Thermometer (Sprt) Coefficients - Fluke 525A User Manual

525A
Users Manual
Entering Custom Standard Platinum Resistance Thermometer (SPRT)
Coefficients
To enter coefficients for a custom SPRT
1. Press C to enter RTD mode.
2. Press E until you get the
3. Enter the
4. Enter the
5. Enter the nominal resistance (R
6. Enter the temperature coefficients and press J. Press I H to enter a
positive or negative exponent for the coefficient.
2-6
RTD SPRT
and press J.
MIN TEMP
and press J.
MAX TEMP
display and press J.
) and press J.
0