Maintaining the Calibrator
6
Service Center Calibration or Repair
Service Center Calibration or Repair
Calibration, repairs, or servicing not covered in this manual should be performed
only by qualified service personnel.
Verify that the Calibrator is being operated in accordance with the instructions in
this manual. If the Calibrator is faulty, send a description of the failure with the
Calibrator. Pressure modules do not need to accompany the Calibrator unless the
module is faulty also. Be sure to pack the Calibrator securely, using the original
shipping container if it is available. Send the equipment postage paid and insured,
to the nearest Service Center. Fluke assumes no responsibility for damage in
transit.
The Fluke 525A Calibrator covered by the warranty will be promptly repaired or
replaced (at Fluke's option) and returned to you at no charge. For more
information about warranty terms, refer to the Warranty provided earlier in this
manual. If the warranty period has expired, the Calibrator will be repaired and
returned for a fixed fee. If the Calibrator or pressure module is not covered under
the warranty terms, contact an authorized Service Center for a price quote for
repair.
To locate an authorized Service Center, refer to "Contacting Fluke" at the
beginning of the manual.
6-15