Battery Backup; Mechanics; Environmetal; General - Fluke PM3082 Service Manual

CHARACTERISTICS
CHARACTERISTICS

2.10.2 Battery backup

DATA & SETTINGS
RETENTION
Retention time
Batteries:
Recommended type
Quantity
Temperature range
Note 1: When instrument is switched off or during mains failure.
Note 2: According to IEC 285 (= Alkaline Manganese Penlight Battery), e.g. LR6.
Note 3: At -40...0°C settings retention is uncertain. It is advised to remove batteries from instrument
when it is stored during longer periods (>24h) below -30 °C or above 60 °C. UNDER NO
CIRCUMSTANCES BATTERIES SHOULD BE LEFT IN THE INSTRUMENT AT
TEMPERATURES BEYOND THE RATED RANGE OF THE BATTERY SPECIFICATION.
2.11

MECHANICS

PORTABLE VERSION
Dimensions:
Length
Width
Height
Mass: Instrument
COOLING
2.12

ENVIRONMETAL

2.12.1 General

The characteristics are valid only if instrument is checked in accordance with the official checking
procedure. Warming-up and recovery time are in accordance with MIL-T-28800D par. 3.7.1.1.
The instrument meets the environmental requirements of MIL-T-28800D Type III Class 3, Style D,
Color R, unless specified otherwise.

2.12.2 Environmental

TEMPERATURE
Operating:
min. low
temperature
max. high
temperature
Non operating (storage):
min. low
temperature
max. high
temperature
SPECIFICATION
See note 1
2 years
LR 6
2
0...+70 °C
481 mm
341 mm
139 mm
8.5 kg
Forced air,
Regulated
0 °C
+ 50 °C
- 40 °C
+70 °C
ADDITIONAL INFORMATION
See note 2
See Note 3
Handle excluded
Add 5 mm for cover and 65 mm
for handle
Add 50 mm for handle
Add 8 mm for feet
No air filter
See note 1
2 - 1 5