Polycom CX700 User Manual page 15

To log in on the Polycom CX700:
After the initial Microsoft Unified Communications introduction screen
1
appears, the setup screen will appear.
Follow the instructions for setting up the touch screen.
The Sign In screen appears on the graphic display.
Using the graphic display's soft keyboard, enter the following:
2
— Your Microsoft Lync 2010 sign-in name (for example,
user1@polycom.com)
— Your network domain and username (for example, polycom\user1)
— Your password
Select Sign In.
3
If you have connected your Polycom CX700 IP phone to your computer,
you can log in using Microsoft Lync 2010. Select Advanced, and then select
Sign in via PC.
Getting Started with Your Phone
1 - 9