RUGGEDCOM RX5000
Installation Guide
Technical Specifications
The following sections provide important technical specifications related to the device and available modules:
•
Section 4.1, "Power Supply Specifications"
•
Section 4.2, "Failsafe Relay Specifications"
•
Section 4.3, "Copper Ethernet Port Specifications"
•
Section 4.4, "Fiber Optic Ethernet Port Specifications"
•
Section 4.5, "Serial Port Specifications"
•
Section 4.6, "Operating Environment"
•
Section 4.7, "Mechanical Specifications"
Section 4.1
Power Supply Specifications
Power Supply Type
b
HI (125/250 VDC)
b
HI (110/230 VAC)
a
Power consumption varies based on the device configuration. Each 10/100Base-Tx port consumes roughly 1 W less than a fiber optic port.
b
The HI power supply is the same power supply for both AC and DC.
c
(T) denotes time-delay fuse. Internal fuse is not user-replaceable.
d
Rating at 85 °C (185 °F) ambient temperature at worst-case load.
Section 4.2
Failsafe Relay Specifications
Maximum Switching Voltage
Rated Switching Current
Section 4.3
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RX5000.
Power Supply Specifications
Input Range
Min
88 VDC
85 VAC
Parameter
Internal Fuse Rating
Max
300 VDC
6.3 A, 250 V(T)
264 VAC
Value (Resistive Load)
2 A @ 250 VAC, 2 A @30 VDC
Technical Specifications
Max. Power
Consumption
c
84 W
250 VAC, 125 VDC
Chapter 4
a
d
29