Sfp Optic Ethernet Ports - Siemens RUGGEDCOM RX5000 Installation Manual

RUGGEDCOM RX5000
Installation Guide
1
Figure 20: MTRJ Port
1. Tx Connector 2. Rx Connector
1
Figure 22: SC Port
1. Tx Connector 2. Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to
Specifications".
Section 3.5

SFP Optic Ethernet Ports

SFP (Small Form-Factor Pluggable) optic Ethernet ports are available with LC (Lucent Connector) connectors.
Make sure the Transmit (Tx) and Receive (Rx) connections of each port are properly connected and matched to
establish a proper link.
Figure 24: LC Port
1. Tx Connector 2. Rx Connector
NOTE
SFP modules, as well as their optical ports, can be safely inserted and removed while the chassis is
powered and operating.
The following sections describe how to install and remove SFP optical ports:
• Section 3.5.1, "Installing an SFP Optical Port"
• Section 3.5.2, "Removing an SFP Optical Port"
SFP Optic Ethernet Ports
2
Figure 21: LC Port
1. Tx Connector
2
Figure 23: ST Port
1. Tx Connector
1
1
2. Rx Connector
1
2. Rx Connector
Section 4.4, "Fiber Optic Ethernet Port
2
Chapter 3
Communication Ports
2
2
23