Safety Key Lock - CDA HC6621FR Installation - Use - Maintenance

Safety Key Lock

To prevent accidental use, the hob has a safety key lock which
switches controls off temporarily or completely. The safety key lock
can be activated when the hob is turned on but not when power has
been switched off at, or the appliance disconnected from, the mains.
The safety key lock is automatically activated after mains power
supply has been restored.
To activate the safety key lock
With the hob switched on, simply touch the safety key lock sensor (2)
for approximately 2 seconds. The hob will beep and the safety key
lock LED should illuminate. With either one or more zones actively
heating the lock can still be activated. Simply press and hold the
safety key lock sensor (2) for approximately 2 seconds. The hob will
beep and the safety key lock LED should illuminate.
To deactivate the safety key lock
Simply touch and hold the safety key lock sensor (2) for approximately
2 seconds. The hob will beep and the safety key lock LED should
extinguish.
Please note: The safety key lock may activate when the power supply
is activated for the first time. The safety key lock sensor LED will flash
when you try to operate the hob if so. Simply deactivate the safety key
lock as per the above step and proceed to use the hob as normal.
10