Operation Conditions Of Each Function - Toyota Camry 2018 Owner's Manual

■

Operation conditions of each function

●
Lane departure alert function
This function operates when all of the following conditions are met.
• LDA is turned on.
• Vehicle speed is approximately 32 mph (50 km/h) or more.
• System recognizes white (yellow) lines.
• Width of traffic lane is approximately 9.8 ft. (3 m) or more.
• Turn signal lever is not operated.
• Vehicle is driven on a straight road or around a gentle curve with a radius
of more than approximately 492 ft. (150 m).
• No system malfunctions are detected. (P. 262)
●
Steering control function
This function operates when all of the following conditions are met in addi-
tion to the operation conditions for the lane departure alert function.
• Setting for "Steering Assist" in
play) of the multi-information display is set to "On". (P. 92, 104)
• Vehicle is not accelerated or decelerated by a fixed amount or more.
• Steering wheel is not operated with a steering force level suitable for
changing lanes.
• ABS, VSC, TRAC and PCS are not operating.
• TRAC or VSC is not turned off.
• Hands off steering wheel alert is not displayed. (P. 260)
●
Vehicle sway warning
This function operates when all of the following conditions are met.
• Setting for "Sway Warning" in
of the multi-information display is set to "On". (P. 92, 104)
• Vehicle speed is approximately 32 mph (50 km/h) or more.
• Width of traffic lane is approximately 9.8 ft. (3 m) or more.
• No system malfunctions are detected. (P. 262)
4-5. Using the driving support systems
(4.2-inch display) or
(4.2-inch display) or
259
(7-inch dis-
(7-inch display)
4