Re-Enabling The Intelligent Clearance Sonar System; Intuitive Parking Assist Buzzer - Toyota Camry 2018 Owner's Manual

330
4-5. Using the driving support systems
■

Re-enabling the Intelligent Clearance Sonar system

To re-enable the Intelligent Clearance Sonar system when it is disabled due
to operation of the Intelligent Clearance Sonar function, either enable the sys-
tem again (P. 325), or turn the engine switch off and then back to IGNITION
ON mode.
Additionally, if the object becomes no longer in the traveling direction of the
vehicle or if the traveling direction of the vehicle changes (such as changing
from moving forward to backing up, or from backing up to moving forward),
the system will be re-enabled automatically.
■
Objects that the Intelligent Clearance Sonar function may not detect
The sensors may not be able to detect certain objects, such as the following.
●
Cotton cloth, snow, and other materials that are poor reflectors of ultrasonic
waves.
(People may also not be detected depending on the type of clothing they are
wearing.)
●
Objects which are not perpendicular to the ground, are not perpendicular to
the traveling direction of the vehicle, are uneven or are waving.
●
Low objects
●
Thin objects such as wires, fences, ropes and signposts
●
Objects that are extremely close to the bumper
■

Intuitive parking assist buzzer

Regardless of whether the intuitive parking assist system is enabled or not
(P. 314), if the Intelligent Clearance Sonar system is enabled (P. 325),
the front or rear sensors detect an object and brake control is performed, the
intuitive parking assist buzzer will sound to notify the driver of the approxi-
mate distance to the object.