Emergency towing procedure (vehicles with a towing eyelet)
Take out the towing eyelet. (P. 513)
1
Remove the eyelet cover using a flathead screwdriver.
2
To protect the bodywork, place a rag between the screwdriver and the
vehicle body as shown in the illustration.
Vehicles without paddle shift
switches
Insert the towing eyelet into the
3
hole and tighten partially by
hand.
Tighten down the towing eyelet
4
securely using a wheel nut
wrench or hard metal bar.
Securely attach cables or chains to the towing eyelet.
5
Take care not to damage the vehicle body.
7-2. Steps to take in an emergency
Vehicles
switches
with
paddle
shift
491
7