476
6-3. Do-it-yourself maintenance
Insert a small flathead screw-
4
driver
between
bumper and fender liner at
the position marked with a
"" and then separate the
front bumper from the fender
liner.
To separate the front bumper
from the fender liner, pry up the
fender liner while pulling the
front bumper outward as shown
in the illustration.
Pull back the fender liner and
5
turn
counterclockwise.
Remove the light bulb.
6
Install a new light bulb and
7
then install the bulb base to
the light unit by inserting it
and turning it clockwise.
the
the
bulb
base
front