Genie ZX-135/70 with Jib-Extend Operator's Manual page 61

Third Edition • First Printing
Diesel Fuel Requirements
Satisfactory engine performance is dependent on
the use of a good quality fuel. The use of a good
quality fuel will give the following result: long
engine life and acceptable exhaust emissions
levels.
Minimum diesel fuel requirements for each engine
are listed below.
Perkins 1104D-44T Engine
Fuel Type
Perkins 854F-34T Engine
Fuel Type
Deutz TD2011 L04i Engine
Fuel Type
Deutz TD2.9L Engine
Fuel Type
Part No. 1272823GT
Low Sulfur Diesel (LSD)
Ultra Low Sulfur Diesel (ULSD)
Low Sulfur Diesel (LSD)
Ultra Low Sulfur Diesel (ULSD)
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in oil
level that might indicate the presence of hydraulic
system problems.
1 Be sure that the boom is in the stowed position
and the engine is off.
2 Visually inspect the sight gauge located on the
side of the hydraulic oil tank.
Result: The hydraulic oil level should be
between the two marks on the decal next to the
sight gauge.
3 Add oil as needed. Do not overfill.
Maximum oil level
Minimum oil level
Hydraulic oil specifications
Hydraulic oil type
ZX-135/70
Operator's Manual
Maintenance
Chevron Rando HD equivalent
59