Genie ZX-135/70 with Jib-Extend Operator's Manual page 27

Third Edition • First Printing
12 Platform overload indicator light
Light flashing indicates the platform is
overloaded. The engine will stop and no
functions will operate. Remove weight until the
light goes off and then restart the engine.
13 Power indicator light
Light on indicates the machine is on.
14 Check engine indicator light
Light on indicates an engine fault.
15 Low fuel indicator light
Light on indicates the machine is low on fuel.
16 Fault indicator light
Light on indicates a system fault.
17 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
Part No. 1272823GT
18 Dual axis proportional control handle for drive
and steer functions
OR Proportional control handle for drive
function and thumb rocker for steer function.
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Move the control handle in the
direction indicated by the blue triangle and the
machine will steer to the left. Move the control
handle in the direction indicated by the yellow
triangle and the machine will steer to the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Press the left side of the thumb
rocker and the machine will steer to the left.
Press the right side of the thumb rocker and
the machine will steer to the right.
ZX-135/70
Operator's Manual
Controls
25