Advertising A Default Route To An Ipv6 Peer Or Peer Group; Configuring Outbound Route Filtering - HP MSR Series Configuration Manual

Advertising a default route to an IPv6 peer or peer group

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family
view.
4. Advertise a default route to
an IPv6 peer or peer
group.
NOTE:
With the peer default-route-advertise command executed, the local router advertises a default route with
itself as the next hop to the specified IPv6 peer or peer group, regardless of whether the default route is
available in the routing table.

Configuring outbound route filtering

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family view
or IPv6 BGP-VPN instance
view.
4. Configure the filtering of
outgoing routes.
5. Apply a routing policy to
routes advertised to an IPv6
peer or peer group.
6. Specify an IPv6 ACL to filter
routes advertised to an IPv6
peer or peer group.
Specify an AS path ACL to
7.
filter routes advertised to an
IPv6 peer or peer group.
8. Specify an IPv6 prefix list to
filter routes advertised to an
IPv6 peer or peer group.
Command
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name | ipv6-address }
default-route-advertise [ route-policy
route-policy-name ]
Command
system-view
bgp as-number
ipv6-family [ vpn-instance
vpn-instance-name ]
filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name } export [ protocol
process-id ]
peer { ipv6-group-name | ipv6-address }
route-policy route-policy-name export
peer { ipv6-group-name | ipv6-address }
filter-policy acl6-number export
peer { ipv6-group-name | ipv6-address }
as-path-acl as-path-acl-number export
peer { ipv6-group-name | ipv6-address }
ipv6-prefix ipv6-prefix-name export
349
Remarks
N/A
N/A
N/A
Not advertised by
default.
Remarks
N/A
N/A
N/A
Not configured by default.
Not applied by default.
The IPv6 BGP-VPN instance
view does not support the
ipv6-group-name argument.
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.
Not specified by default.
The IPv6 BGP-VPN instance
view does not support this
command.