HP MSR Series Configuration Manual page 183

Figure 51 LOCAL_PREF attribute
• COMMUNITY
The COMMUNITY attribute identifies the community of BGP routes. A BGP community is a group
of routes with the same characteristics. It has no geographical boundaries. Routes of different ASs
can belong to the same community.
A route can carry one or more COMMUNITY attribute values (each of which is represented by a
four-byte integer). A router uses the COMMUNITY attribute to determine whether to advertise the
route and the advertising scope without using complex filters, such as ACLs. This mechanism
simplifies routing policy configuration, management, and maintenance.
Well-known community attributes involve the following:
Internet—By default, all routes belong to the Internet community. Routes with this attribute can
be advertised to all BGP peers.
No_Export—Routes with this attribute cannot be advertised out of the local AS or out of the
local confederation, but can be advertised to other sub ASs in the confederation. For
confederation information, see
No_Advertise—Routes with this attribute cannot be advertised to other BGP peers.
No_Export_Subconfed—Routes with this attribute cannot be advertised out of the local AS or
other sub ASs in the local confederation.
You can configure BGP community lists to filter BGP routes based on the BGP community attribute.
Extended community attribute
•
To meet new demands, BGP defines the extended community attribute. The extended community
attribute has the following advantages over the community attribute:
Provides more attribute values by extending the attribute length to eight bytes.
Allows for using different types of extended community attributes in different scenarios to
enhance route filtering and control and simplify configuration and management.
The device supports the Route-Target attribute for VPN and Source of Origin (SOO) attribute. For
more information, see MPLS Configuration Guide.
"Settlements for problems in large-scale BGP
171
networks."