Table of Contents
Advertisement
Figure 12
H. Hold Button
To put the line on hold, simply press
the HOLD button and return the
handset to its cradle. Notice the red
light HOLD indicator. When you
pick up an extension phone on the
same line, the P400 will disconnect.
Putting the call on hold also mutes
the handset.
I. Last Number Redial Button
The P400 phone remembers the last
number dialed from the phone up to
32 digits. Lift the handset and simply
press the REDIAL button to dial the
last number dialed.
If any problem should arise during use of your P400 phone, try the suggestions
listed below. Should the difficulty persist, contact Clarity or your authorized
dealer for assistance.
SYMPTOM
No dial tone
No number dialed when
memory button pressed
Call cannot be dialed, or
is dialed slowly
No audible ring
14
Telephone Operations
FLASH
CLARITY
BOOST
POWER
Troubleshooting
CAUSE AND CORRECTIVE ACTION
Check all phone cord connections.
No number stored in that memory button.
See "Programming The Photo Directory", p. 12.
See "Installation" section to
reset the dial mode switch, p. 11.
Make sure the ringer is not set
to "Off" position.
Figure 13
J. Flash Button
The flash feature is used to access
special telephone functions and ser-
vices available from your local phone
company, such as: call waiting, 3-way
calling and others. Press this button
to activate the flash feature.
Figure 14
FLASH
BOOST
FLASH
BOOST
CLARITY
POWER
Hide quick links:
Advertisement
Table of Contents
