Commissioning
12.2 Commissioning the 3RW30
12.2
Commissioning the 3RW30
Commissioning, description of the start and output parameters
12.2.1
Commissioning procedure
1. Check the voltages and wiring.
2. Set the start parameters (for recommended parameters, refer to the quick commissioning
table).
3. Start up the motor and if necessary optimize the parameters (refer to the quick
commissioning table).
4. Document the parameter settings if required (refer to chapter Table of parameters used
[Page 205]).
92
SIRIUS 3RW30 / 3RW40
Manual, 01/2010, 535 1995-02 DS01