Commissioning
12.9 Functions of the outputs
DEVICE LED: Continuously lit (green).
STATE / BYPASSED and FAILURE LEDs: Off.
The AUTO LED indicates the color of the set RESET mode.
12.9.3
Function of the FAILURE / OVERLOAD output
FAILURE / OVERLOAD output contact
If there is no rated control voltage or if a failure occurs, the potential-free FAILURE /
OVERLOAD output is switched.
Note
For information about whether or not faults can be acknowledged, as well as the recovery
time and the corresponding LED and output contact states, refer to chapter Diagnostics and
fault signals [Page 44].
112
SIRIUS 3RW30 / 3RW40
Manual, 01/2010, 535 1995-02 DS01