Setting The Cycling Mode Features - Polar Electro Polar Protrainer XT User Manual

The displays change faster if you press and hold STORE/LAP/
RECOVERY. Release the button when you want to see a certain
display for a longer time.
To view the file backwards, press SIGNAL/LIGHT instead of STORE/
LAP/RECOVERY.
You have the following two alternatives to continue:
1. To recall the same file again, press STORE/LAP/RECOVERY.
The front pages of the file alternate on the display.
Continue from Recalling the training information.
2. To return to the Time of day display, press SELECT three times.
26 26
PROXT GBR/E 26-27
SETTING THE CYCLING
MODE FEATURES
To be able to use the Cycling mode features,
you need an optional Polar Speed Sensor.
You can set the following features in the cycling mode:
- Wheel size calibration
- Odometer
- Total riding time
You can see the total cycling distance and the total riding time in
the uppermost row of the Time of day display :
1. Press and hold SIGNAL/LIGHT and you can see the odometer
reading.
2. Press and hold SIGNAL/LIGHT again and you can see the hours
for total riding time.
3. To return to the normal Time of day display with a day indicator
press and hold SIGNAL/LIGHT a third time.
To get in to the Cycling feature setting mode:
1. In the Time of day display press SELECT three times.
SET is flashing in the upper right corner of the display.
The uppermost block of the graphic bar representing the setting
of Timers 1 & 2 is flashing.
TIM 1 is displayed.
2. Press SET/START/STOP and SIGNAL/LIGHT simultaneously .
SET, the uppermost block of the graphic bar and the number of
the Wheel size (1 or 2) are flashing.
WHL, the value for wheel size and the bike symbol are
displayed.
3. Go through the Cycling feature settings (wheel size, odometer and total
riding time).
7.2.2001, 09:01
27