Controls; Figure 1-4 Nav/Com Controls - Garmin G1000 Pilot's Manual

OPERATION – COM

1.8 CONTROLS

The NAV Frequency window is controlled by knobs
and keys located to the left side of the display, while the
COM Frequency window is controlled by knobs and keys
located to the right side of the display.
The controls associated with the NAV window are:
• A VOL/PUSH ID knob
– Turn to adjust the NAV radio volume level.
– Press to turn the Morse code identifi er ON
and OFF.
• A Frequency Toggle key
– Press to toggle the NAV frequencies between
the active and standby fi elds.
• A dual NAV knob
– Turn to tune a NAV frequency in the NAV
tuning box (large knob for MHz; small knob
for kHz).
– Press to toggle the NAV tuning box between
the NAV radios.
4 Garmin Proprietary
G1000_COM-NAV_PG.indd 4
NAV Controls
VOL/PUSH
ID Knob
Frequency Toggle Key
Dual NAV
• Turn to tune in desired
• Press to switch radios.

Figure 1-4 NAV/COM Controls

Garmin G1000 VHF NAV/COM Pilot's Guide
The controls associated with the COM window are the
following ones:
• A VOL/PUSH SQ knob
– Turn to adjust the COM radio volume level.
– Press to turn squelch ON and OFF.
• A Frequency Toggle key
– Press to toggle the COM frequencies between
the active and standby fi elds.
• A dual COM knob
– Turn to tune a COM frequency in the COM
tuning box (large knob for MHz; small knob
for kHz).
– Press to toggle the COM tuning box between
the COM radios.
VOL/PUSH
SQ Knob
Dual COM
Knob Knob
frequencies.
COM Controls
190-00302-01 Page Rev. 1
2/10/2004, 8:47:25 AM