User Settings (Fs3) - Polar Electro FS1 User Manual

4.3 USER SETTINGS (FS3)

Setting Age
1. In the Time of Day display, press the front button until
USER is displayed. Wait for three seconds to enter the
user settings.
2. AGE is displayed for two seconds.
The digits for years are fl ashing.
When
increase the value by pressing
the front button.
If you increase the value, the
wrist unit goes into decrease
mode
When is on the display, you can decrease the value by
pressing the front button.
If you decrease the value, the wrist unit returns to increase
mode after two seconds.
3. When the desired value is on the display, wait until OK?
ZONE SET is displayed to inform that the age-based heart
rate limits are set.
The wrist unit returns to the Time of Day display.
Note: When setting your age, current heart rate limits will be
is on the display,
overwritten by age-based heart rate limits (if you have earlier
set heart rate limits manually). If you want, you can change the
age-based heart rate limits in ZONE mode afterwards.
Note: If you do not change the value within three seconds, OK?
is displayed. To approve your choice, press the front button.
after two seconds. If you do not approve your choice within three seconds, the wrist
unit returns to selection mode.
is displayed. To approve your choice, press the front
button.
17