Polar Electro FS1 User Manual page 18

4. When the desired value is on the display, wait until OK?
is displayed. Press the front button to approve your
choice.
5. LOW is displayed for two seconds.
A default setting of 80 for the lower limit is fl ashing.
Alternatively, an age-based limit is displayed if you have
set your user information (FS3).
When
increase the value by pressing
the front button.
If you increase the value, the
wrist unit goes into decrease
mode
When is on the display, you can decrease the value by
pressing the front button.
If you decrease the value, the wrist unit returns to increase
mode after two seconds.
is on the display,
after two seconds.
6. When the desired value is on the display, wait until OK?
is displayed. Press the front button to approve your
choice.
The wrist unit returns to the Time of Day display.
19